Surge Protection Device,AC SPD,220V surge protection, 110V SPD,230V Surge Protection,single phase SPD,20kA Surge Protection,SPD manufacture,40kA SPD

Signal Surge Protection

Home > Signal Surge Protection

TUV Certified AC and DC Surge Protection Device for Signal System

Item No.: DXH06-MPG Series
Zhongpushengde Brand.
SPD Model DXH06-MPG Series is applicable for surge and over-voltage in the field of DC and AC power supply system.
TUV Certified.
INQUIRY
Description
Signal Surge Protection
I. Application
SPD Model DXH06-MPG Series is applicable for surge and over-voltage in the field of DC and AC power supply system.
MPG means MP+MG,you could choose the MP part for your system.


II. Technical Parameters
Power Surge Protection Module Signal ProtectionModule
Brand Zhongpushengde
Certification - TUV - TUV
Model M- MP12 MP24 MP220 MG
Operating Voltage 12V 24V 220V Itotal:10kA
Interface Type 2P Terminal 2P Terminal 2P Terminal RJ45
Discharge
Current Capacity
In:3kA
Imax:5kA
In:5kA
Imax:10kA
X-X: 4.0kV
X-PE: 6.0kV
Protection Level(Up) ≤150V ≤180V ≤1.2kV ≤20V
Response Time(T) <25ns <1ns
Maximum operate current transmission rate 10A 100/1000 Mbps
Earth line(mm² ) ≥1.5
Grounding Resistance(R) ≤4Ω
Protection Level IP20
Operating Temperature -40℃~+80℃
Overall Size(mm) 90×66×18
Installation Method 35 mm DIN-rail

III. Main Features:

lLow Residual Voltage.
lTwo Levels surge protection. The lightning protection result can be enhanced by the coupling of the two levels of discharging and clamping.
l35mm Din-rail installation
l Independent grounding interface which is more convenient to install.

IV. Dimensions:
Signal Surge Protection

V. Wiring Diagram:
Signal SPD
google-site-verification: googled0561bc69b0d47a1.html