TUV Certified Signal Network RJ45 Surge Protective Device

1. Application
QFL06-MG Network signal surge protection device is suitable for a variety of monitoring systems, communication systems, measurement and control system lines over-voltage protection. To protect it from lightning induced voltage, power supply interference, electrostatic discharge caused by damage.
2. Main Features:
a. Using the front and rear two levels of protection;
b. Low Residual Voltage;
c. 35 mm rail installation, integrated module design;
d. Set the independent ground port, easy to ground.
3. Dimensions:

4. Technical Parameters:

Model	Signal Network SPD QFL06-MG
Interface	RJ45
Nominal voltage (Un)	2.8V
Discharge Current total(8/20μS)	10kA
Differential-mode X-X (10/700μS)	4.0kV
Common-mode X-PE (10/700μS)	6.0kV
Voltage protection level Up	<20V
Protection Lines	1-8 lines
Transmission Rate	1000Mbps
Response Time	<5nS
Grounding Wiring Diameter	≤4mm2
Working Temperature	-40℃～70℃
Relative Humidity	10%～90%（25℃）